Tips for Encountering Grooming Equipment on the Trail First, recognize that trail groomers may be working on the trail at any time. They are there in an effort to provide you with smooth, safe trails. Always keep your snowmobile under control and anticipate that a groomer might be around the next corner or over the hill.

Snowmobiles are much smaller and much more maneuverable than groomers, so always yield to a groomer. Always slow down when approaching or overtaking grooming equipment. Groomers move very slowly – typically only 5 to 8 miles per hour – so they are almost stationary when compared to a snowmobile traveling 30 to 60 miles per hour.

When approaching an oncoming groomer on the trail, slow down and move your snowmobile to the far right side of the trail. Realize that the grooming drag or tiller behind the grooming tractor may be very wide, may extend wider than the tracks of the tractor, and may essentially take up most or all of the trail’s width. If the trail is narrow or winding, you may need to stop at the far outside edge of the trail to let the groomer pass.

When overtaking a groomer from the rear, slow down and assess the situation ahead. If there is good sight distance and the trail ahead is clear of oncoming traffic, pass the groomer while operating with caution. Beware that the groomer may create snow dust and make visibility poor. If the trail is narrow or winding, you may need to stay behind the groomer until the operator pulls over and signals for you to pass. Be patient because it may take time before there is a safe location and safe conditions for passing.

If you need to stop a groomer to ask for information or assistance, understand this should be done only in an area where there is good sight distance and it is safe to stop. The groomer operator may request that you follow the groomer to a safer location where he can stop and provide the assistance you need.